Kafuter K-0609 Anaerobic Adhesive Seal Glue Cylindrical Fixed Glue Bearing Locking Anti-loose Strong High Temperature Resistance
$12
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
K-0609 (low viscosity / general purpose cylindrical parts holding glue) is a one-component, high-strength, general-purpose, low-viscosity anaerobic cylindrical hole/shaft fitting retaining adhesive. The holding glue cures when it is isolated from the air between two closely fitting metals.
Typical use
It is used for the hole/shaft fittings with radial clearance
Typical applications:assembly of new parts bearings, bushings, small motor rotor shafts, bushings, etc.
Specification
Chemical composition methacrylate
Appearance green viscous liquid
Viscosity (25 °C, mPa.s) 100～300
Specific gravity 1.05～1.10
Maximum filling radial clearance (mm) 0.13
Shear strength (MPa) ≥10
Working temperature (°C) -54～149
Initial curing time (minutes) ≤15
Full solid (hours) 24
Instructions for use
· The surface to be coated should be clean, dry and free of grease.
· For the sliding fittings, it is only necessary to apply a circle of glue around the shaft and the guide angle of the sleeve, and rotate it to the left and right during assembly to ensure good coating.
For press fit, both quilt bonded surfaces are coated with glue and assembled on a suitable high pressure press.
For heat shrink fittings, the glue should be applied to the shaft and then heated to produce sufficient clearance for free assembly.
Do not tamper with the assembled parts until they have reached sufficient strength.
Precautions for use
This retaining adhesive should not be used on plastic parts; to avoid contamination of the original glue, do not pour the poured glue back into the original packaging
Safety Precautions
This retaining gel contains methacrylate and is irritating to the skin and eyes. If the skin comes into contact, immediately wash it with water; if it touches the eyes, rinse immediately with clean water and go to the hospital for treatment.
Package Included
1 x Kafuter K-0609 Anaerobic Adhesive Seal Glue
| Weight | 0.106 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
SUNSHINE Transparent Black Glue Multifunction Adhesive for Jewelry Stationery DIY Phone Screen Repair
$9Repair Adhesives & TapesAdd to cartFeatures-Widely used,suitable for electronic products/mobile phones/crystal jewelry/leather/clocks, etc.-Needle mouth design, save environmental protection, no waste, no clogging-High-strength adhesion,brushing effect is good.SpecificationBrand:SUNSHINE Name:multi-purpose glue (transparent)Model:G-20Net weight:50ml Gross weight:61gProduct size:158*47*30mmPacking size:160*34*35mmPackage included1 x multi-purpose glue
-
High Strength and Viscous Double Sided Tape Model Tool Tape
$6Repair Adhesives & TapesAdd to cartFeaturesStrong double-sided adhesive, full viscous, cost-effective, good texture, non-toxic and environmentally friendly.It is suitable for sticking electronic, furniture and other items.SpecificationSize:Outer Diameter:12.5cm Rubber Surface Width:1.7cmColor:WhitePackage included1 x Double Sided Tape
-
Kafuter K-5202 80g High Temperature Resistant thermal Grease Heat Sink Paste for LED Light CPU PCB COB Chips Special Glue
$11Repair Adhesives & TapesAdd to cartFeaturesWhite thixotropic elastomerOne-part,room cureGood cold and hot toleranceThermal conductivity 1.2K-5202 is a reinforced thermally conductive silicone elastomer with great adhesion, insulation and dissipationOne part, room cure, packing in soft metal tubeExcellent in cold and high alternating resistance (-60~ 280℃)No peeling and good disassemble after long time usageThe elastomer with high bonding strength , the shear …
-
Kafuter K-4406 20g instant Strong Adhesive Quick-Drying Glue for PC ABS PVC Acrylic Plastic Glass Wood Waterproof Transparent
$9Repair Adhesives & TapesAdd to cartSpecificationBase chemical composition:cyanoacrylateAppearance:colorless transparent liquidViscosity (mPa.s):15 ～ 25Specific gravity:1.05Flash point (℃):＞ 80Maximum filling gap (mm):0.10Curing time at room temperature (s)Steel:10 ～ 20RubberPVC:10 ～ 15Performance after curingFull solidification time at room temperature (hr):24Shear strength (steel-steel, MPa):15Working temperature (℃):-54 ～ 80InstructionsThe bonding surface should be cleaned, dry and free of grease, and the surface should be flat.Apply …
Customers Also Viewed
-
Drillpro 2Pcs Magnetic Screw Drill Tip Holder Angle Magnetic Pivoting Bit Tip Holder Magnetic Screwdriver Drill Bit Drive Guide Extensions Adapter
$28Drill AttachmentAdd to cartSpecificationsMaterial:Chrome Vanadium SteelColor:RandomDrive:1/4 Inch Hex(6.35mm)Shank:1/4 Inch Hex(6.35mm)Magnetic or not:MagneticFeatures1. The quick-connect handle is suitable for all electric drills and socket wrenches. The head is magnetic and can be quickly connected to the 1/4‘hexagon handle bit and socket.2. Chrome vanadium steel forging, high hardness and high torque. Built-in strong magnetism, the interface has a locking device.3. …
-
4.5x-11x Magnifier Desk Lamp Desktop Magnifying Glasses Repair Clampwith LED Light
$35Soldering SuppliesAdd to cartFeaturesLED lighting function can switch between high light and soft light.High magnification primary lens, clear magnification effect, natural.Suitable for electronic welding, model making, circuit board maintenance, etc.Two adjustable angle auxiliary clamps are used to fix objects of different sizes for multi-angle observation.SpecificationMaterial:Iron + Plastic + Acrylic LensProduct Color:WhiteLight Watt:0.14WLight:2x LED LightsFeature:With Switchable Cold and Warm …
4.5x-11x Magnifier Desk Lamp Desktop Magnifying Glasses Repair Clampwith LED LightRead More
-
Metal Dual Axis Digital inclinometer Protractor Digital Angle Finder Bevel Box with Backlight And Single-sided Magnetic
$79Wood Angle RulerAdd to cartFeature1.Dual and single axis with user friendly LCD display angle.2.With backlight3.A variety of styles can be selected (metal single-side, metal three-sides, aluminum frame) to meet the needs of different occasions4.Automatic power off in three minutes when you don’t use it. It can save power and extending battery life.5.Biaxial measurement in horizontal and vertical directions6.Measuring plane …
-
69cm SDS Shank Concrete Mixing Rod Cement Mixer Tiling Auger Drill Bit for Electric Drill
$87Auger DrillAdd to cartDescription69cm SDS Shank Stirring artifact concrete ash rod spiral leaf electric hammer fast glue cement mixer tiling toolSpecificationsMaterials:Carbon steelSize:12.5x69cmSuitable:concrete mixing rodType:SDS ShankFeatures– Carbon steel, durable and long lasting.– The size is 12.5x69cm, which is easy to operate.– Applicable to garden loose soil, it needs to be used with electric drill.Package Included1 x Electric Drill Bit(This …
69cm SDS Shank Concrete Mixing Rod Cement Mixer Tiling Auger Drill Bit for Electric DrillRead More
Reviews
There are no reviews yet.