DANIU 300V 20A Electric Energy Tester Current Voltage Meter Charger Power Supply Capacity Tester

Specification
Input/output interface:100A Large current copper nose screw
Voltage range:0.00 V ~ 300V Resolution precision:0.05 V
Current range:0.00 A ~ 20A Resolution precision:0.05 A
Capacity range:0 ~ 999.999Ah Resolution precision:0.01 Ah
Power cumulative range:0 ~ 99999.9Wh Resolution precision:0.01 Wh
Power range:000.00 ~ 2999.99W Resolution precision:0.01 W
Impedance range:1 ~ 999.9 Resolution precision:0.1
Temperature range:0 ~ 99 ℃ Resolution precision:1℃
Timing maximum time:999H59M59S Resolution precision:1S
Timing remind Settings:the countdown 24 hours of any value
Small current standby alert threshold parameters
Small voltage power supply requirements:measuring
If it is low voltage, 4~30VDC,please supply independent power supply interface.
Time to refresh:> 500 ms/time > 500 ms/times
Measurement rate:0.5 times per second
Over-voltage over-current set the alarm mode:display warning interface to alert users
Over pressure to remind the set range:1 ~ 300V
Low pressure remind set range:0 ~ 149V
Flow to remind the set range:0.2 ~ 100A
Display type:micro power consumption of LCD module LCM black font
Green backlit display in both Chinese and English.
Product size:105 x 81 x 17mm
Since the power flow
Working temperature:-10 ~ +60℃
Working humidity:10 ~ 80 (dew) undoubtedly 10 ~ 80 (no doubt)
The pressure of work:80 ~ 106 kpa
Operation method
Keystrokes using method and the capacity, power, time reset Settings
1) Reset button long-press all data (mAh, Wh, 00:00:00)
2) Quickly button twice – capacity Reset (mAh)
3) Quickly button three – power reset(Wh)
4) Quickly button four – time reset(00:00:00)
5) Quickly button five – Set up automatic standby and Discharge the countdown to remind regularly
6)When no load output no-load, quick seven keys, and for the current zero to zero in the current environment temperature for accurate calibration, so more can do more accurate measurement in small current.
7)Click the switch interface, in the high voltage; low voltage when backlit parameter Settings, by double Strike and three strikes for parameter
adjustment, the adjustment process long press is a continuous fast speed value adjustment.
Key functions
1) Keep Press long time the key:Zero all data(mAh,Wh,00:00:00).
2) Double-click the key:for the Capacity data reset to zero.
3) Three-click the key:for the electric quantity data reset to zero.
4) Four-click the key:for the time data reset to zero.
5) Five-click the key:Auto-Standby Mode & Timer for discharge alert.
6) Single-click to change the window, entering the setup window for high&Low Voltage background light, adjust the parameters by double-clicking or three-clicking, click-holding for continuous and quick adjust.
7) Without load,quickly click the key for 7 times, for current data reset to zero(0.00A).It is for Precise calibration in local circumstance, so that the small current could be precisely measured.
8) Keep pressing the key when power-off, then power-on, entering the Background setup window for High&Low Voltage over-load, single-click or double-click to adjust the parameters, keep press the key long time to reset to the default setup.
Note:Please don’t calibrate the voltage or current if without standard instruments.
Package Inlcuded
1 x 300V 20A Electric Energy Tester
1 x Independent Power supply Cable
1 x 1M Waterproof Temperature Probe
1 x English User Manual