Machifit CNC Z Axis Tool Sensor Precision Tool Setting instrument High Precision Tool Setting Block CNC NC Tool Setting Accessories

Description
CNC Z Axis Tool Sensor Precision Tool Setting Instrument High Precision Tool Setting Block CNC NC Tool Setting Accessories
Specifications
Product Name
Engraving Machine Automatic Knife Instrument
Type
Normally Closed
Normally Open
Voyage
5mm
Pre-trip
Almost Zero
About 0.5mm
Reproducibility
0.001mm
0.001mm
Protection Structure
IP67
IP67
Contact
1.5N
1.5N
Contact Material
Hard Alloy
Hard Alloy
Shell Material
Grinding 4S
Grinding 4S
Protection Tube
1m Minimum Bending Radiu R25
1m Minimum Bending Radiu R25
LED Lights
Normally Open When the Work Off
Normally Open When the Work Off
Cable
3m 4 Core Diameter 5
3m 4 Core Diameter 5
Out of the Alarm Signal
Normally Closed
Normally Closed
Description
Distance measurement signal about 2.5mm
Outpoint ratin DC24V 20mA(MAX)
Recommended value 10mA(resistive load)
Distance measurement signal about 2.5mm
Outpoint rating DC24V 100mA(MAX)
Recommended value 10mA(resistive load)
Features
– Solid Material
The tool and the knife contact surface must be vertical, and vertical contact with the contact surface, well installed on the table with less iron scrap, so as not to affect the accuracy of the knife.
– Arbitraty direction
Rated voltage within the use of voltage within the use of voltage control in the DC10-30V, the current at 20mA, the use of temperature range -25℃~70℃ use better.
– Simple Operation
The diameter of the tool is controlled below 20mm, the knife speed should be controlled at 50-200mm/min, the tool center should fall in the center of the knife face.
– Effortless Effort
When using the blowing function, the outer diameter of the trachea is 6mm in diameter and the diameter is 4~5mm. When used, it should pay attention to the hygienic, clean the oil on the contact surface.
Installation Precautions With Instructions
When the tool is installed directiy on the workbench with the spindle and right angle and parallelism, the mounting surface should be cleaned and fixed with bolts. When installing ont other planes, find the right and parallel faces of the mounting surface. When using the protective cover, pay attention to the repeated use of the contact sruface position, the repetition accuracy of the right angle, the parallelism, the temperature change of the mounting guide, the rigidity (depending on the weight, the contact force).
Electrical Aspects
1.Contact rating DC+24V±10% 20mA (MAX)
2.When the machine body is grounded, use the tool set ont the ground side when connecting.
3.With a knife on the kniffe, the connection should pay attention to and (+)(-). Recommended value 10mA, resistive load.
4.The output structure when the interface module is included, read the guidebook.
Package Included
1 Pc *:CNC Z Axis Tool