New Type 0-8000 Strokes Hand Engraving & Stone Setting Tools GraverMax G8 Quick Setup Jewellery Making Tools Pneumatic Engraver Hand Engraving Machine

Description
Engraveing machine HH-G01 features 0-8000 strokes per minute, a throttle bias adjustment valvee for tailoring throttle response, and a dual-stage precisiion aiir regulator. Advanced ergonomics include front aiir pressure adjustment, Quick Connect aiir couplings, rear mount throttle connection, and an advanced valvee pulse unit that operates with virtually no noise or vibration.
The Engraveing machine HH-G01 has connections for two impact handpieces and an auxiliary aiir connection for other aiir tools, including Rotary handpiece. Two handpieces and one foot control come with Engraveing machine
Specification
Item Number:HR-G002
Power supply:220V 50HZ/110V 60HZ
Handpiece Working Speed:0-8000 strokes/min
Rangee Of Aiir Pressure Display:0-1MPa/0-10kg/cm2
Dimension:29*13*21cm
Weight:9kg
Note
Pic 1:connect large ,small engraving handles and foot switch to the ports o faceplate .
Pic 2:Insert the outlet pipe of aiir compressor into the inlet at the back of engraver .We also suggest installing a reducing valvee and water filter bet – ween aiir compressor and engraver to improve performance .
(1)Switchoff the pressure knob and rotary handle switch to avoid damage on pressure gauge and reducing valvee .
(2)Plugin and switch on .( theindicator light will show )
(3)Setthe switch button to position 1 or 2 .
(4)Adjustthe aiir pressure and rotary speed ,hold the engraving handle ,push the foot pedal down to maxiimum ,slowly spin the pressureknob until the pressure gauge points to 1 .5-2kg/cm2,also ,adjust the rotary speed at the same time to greaten the impact force .
(5)BIASHOW TO USE THE BIAS CONTROL
The adjusting switch can replace the pedal .After you tune the handpiece ,notice that the handpiece starts working as you press down on the foot throttle .Add one or two pounds of aiir pressure control knob .Now , open the bias control by turning it counter-clockwise and notice that it does not take as much pressure on the foot throttle to activate the handpiece .The bias control allows you to adjust the foot throttle action so you can predict the moment the handpiece will start ,giving you optimum handpiece control .This is a feature that one would use for fine detail work such as bulino or shading .By opening the bias control fully ,you will find that the handpiece will start to work without pressing on the foot throttle . You may find this function for some operations such as stippling .
(6)Loosethe foot pedal ,engraving handle will stop working ,install the cutter as the picture below .
(7)Workwith the large /smallengraving handle alternately ;spin the rotary ,handle switch to position 2 and 1 .
(8)Controithe impact (lightto heavy )withthe opening of foot Pedal (smallto large)
Maintenance
(1)After using for a period of time,please empty the water cup of reducing valvee at the back of engraver .
(2)Apply some 10machine oil into the large /smallengraving handles .
(3)In case of malfunctions ,please contact professional technical instead of disassembling the machine without guide .
Package Included
1 x Control Box
2 x Flexshaft&hand piece
1 x Foot Pedal
1 x Filter
1 x Trachea
2 x Hexagon Wrench