Hantek DSO5072P Digital Storage Oscilloscope 70MHz 2Channels 1GSa/s 7inch TFT LCD

Description
Hantek DSO5072P Digital Storage Oscilloscope 70MHz 2Channels 1GSa/s 7inch TFT LCD
Features
70MHz bandwidths
1GSa/s Real Time sample rate
Large (7.0-inch) color display, WVGA(800×480)
Record length up to 40( Kbytes )
Trigger mode:edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard
Multiple automatic measurements
Four math functions, including FFTs standard
Provides software for PC real-time analysis
VGA Optional
Specification
Model:DSO5072P
Acquisition
Sample Rate:Real-Time Sample:1GS/s
Inputs
Inputs Coupling:AC, DC, GND
Inputs Impendance:1MΩ±2% //20pF±3pF
Horizontal System
Sample Rate Range:500MS/s–1GS/s
Waveform Interpolation:(sin x)/x
Record Length:40( Kbytes )
SEC/DIV Range:4ns/div to 40s/div
Sample Rate and
Delay Time Accuracy:±50ppm(at over any ≥1ms time interval)
Position Range:20ns/div to 80us/div; (-8div x s/div) to 40ms;
200us/div to 40s/div; (-8div x s/div) to 400s
△ Time Measurement Accuracy
(Full Bandwidth):Single-shot, Normal mode:± (1 sample interval +100ppm * reading + 0.6ns);
>16 averages:± (1 sample interval + 100ppm * reading + 0.4ns);
Sample interval = s/div ÷ 200
Vertical System
Vertical Resolution:8-bit resolution, all channel sampled simultaneously
Position Range:2mV/div to 10V/div
Bandwidth:70MHz
Rise Time at BNC( typical):5ns
Bandwidth Limit:20MHz
Low Frequency Response (-3db):≤10Hz at BNC
DC Gain Accuracy:±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Trigger System
Trigger Types:Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source:CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes:Auto, Normal, Single
Coupling Type:DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity
(Edge Trigger Type):DC(CH1,CH2)
1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
DC(EXT)
200mV from DC to 100MHz; 350mV from 100MHz to 200MHz;
DC(EXT/5)
1V from DC to 100MHz;1.75V from 100MHz to 200MHz;
AC:Attenuates signals below 10Hz;
HF Reject:Attenuates signals above 80kHz
LF Reject:Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz
Trigger Level Range:CH1/CH2:±8 divisions from center of screen;
EXT:±1.2V;
EXT/5:±6V
Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns:CH1/CH2:0.2div * volts/div within ±4 divisions from center of screen;
EXT:± (6% of setting + 40mV);
EXT/5:± (6% of setting + 200mV);
Set Level to 50%(typical):Operates with input signals ≥50Hz
Video Trigger:
Video Trigger Type:CH1, CH2:Peak-to-peak amplitude of 2 divisions;
EXT:400mV;
EXT/5:2V
Signal Formats and Field Rates, Video Trigger Type:Supports NTSC, PAL and SECAM broadcast systems for any field or any line
Holdoff Range:100ns ~ 10s
Trigger Frequency Counter
Readout Resolution:6 digits
Accuracy (typical):±30ppm (including all frequency reference errors and ±1 count errors)
Frequency Range:AC coupled, from 4Hz minimum to rated bandwidth
Display
Display Type:7 inch 64K color TFT (diagonal liquid crystal)
Display Resolution:800 horizontal by 480 vertical pixels
Display Contrast:Adjustable (16 gears) with the progress bar
Probe Compensator Output
Output Voltage( typical):About 5Vpp into ≥1MΩ load
Frequency(typical):1kHz
Power Supply
Supply Voltage:100-120VACRMS(±10%), 45Hz to 440Hz, CAT II
120-240VACRMS(±10%), 45Hz to 66Hz, CATII
Power Consumption
Fuse:2A, T rating, 250V
Environmental
Temperature:Operating:32°F to 122°F (0°C to 50°C);
Nonoperating:-40°F to 159.8°F (-40°C to +71°C)
Cooling Method:Convection
Humidity:+104°F or below (+40°C or below):≤90% relative humidity;
106°F to 122°F (+41°C to 50°C):≤60% relative humidity
Altitude:Operating:Below 3,000m (10,000 feet);
Nonoperaring:Below 15,000m(50,000 feet)
Mechanical
Size:Length 385mm, Width 200mm, Height 245mm
Weight:3.5KG(with Packing); 2.08KG(without Packing)
Package includes
1 x DSO5072P Digital Oscilloscope
1 x Power cord
2 x Probe
1 x USB cable
1 x CD-ROM