UNI-T UTL8211/UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test
$472
Model UTL8211/Model UTL8212 (40.00)/
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The UTL8200 series electronic load is equipped with a 2.8-inch LCD display, which is convenient and simple to operate, stylish and generous, stable in operation, supports dual-channel completely independent testing, has a wide power measurement range, voltage and current measurement speeds up to 40kHz, and a test resolution of up to 1mV/1mA, with rich test functions and modes, and standard RS-232C communication interface, flexibly meet various on-site test conditions, and realize seamless connection with automated production lines and automatic test systems (ATS).
Application
Power supply test, adapter/charger test, battery test, lithium battery protection board test, ATE, component test, etc., commonly used in home appliance manufacturers, LCD and other computer component manufacturers, switching power supply and LED manufacturers, adapter charger manufacturers and other companies Production and testing use.
Features
UTL8211:Single channel 150V /40A, 400W
UTL8212:Dual channel 150V/2X20A, 2X 200W
CC/CV/CR/CP four basic modes
1mV/1mA high resolution
Dynamic current test
Voltage and current measurement speed up to 40kHz
Multi-mode battery discharge test
List mode, support automatic test
Independent short circuit test function
Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection etc.
Supporting PC software to realize remote operation and monitoring
Power-off memory function
Intelligent temperature control fan
Standard RS-232C interface, support SCPI protocol
Specification:
Function:UTL8211:UTL8212
Number of channels::1:2
Rated value
Voltage:0~150V:0~150V
Current:0~4A, 0~40A:0~2A, 0~20A
Power:400W:2x200W
CC mode
Current:0~4A, 0~40A:0~2A, 0~20A
Resolution:1mA, 10mA; Accuracy:±( 0.05% + 0.05%FS)
CV mode
Range:0~18V, 0~150V; Resolution:1mV, 10mV; Accuracy:±(0.05%+0.1%FS)
CR mode
Range:0.05Ω~7.5KΩ; Resolution:16bit; Accuracy:0.1% + 0.5%FS
CP mode
Range:400W, 200W; Resolution:10mW; Accuracy:0.1% + 0.5%FS
Dynamic mode
T1&T2:100uS-3600S; Accuracy:5 μS±100 ppm; Slope:0.001~0.15 A/μS
Voltage readback
Range:0~18V, 0~150V; Resolution:1mV, 10mV; Accuracy:±( 0.05%+ 0.1%FS)
Current readback
Range
0~4A, 0~40A
0~2A, 0~20A
Resolution:1mA, 10mA; Accuracy:±( 0.05%+ 0.1%FS)
Power readback
Range:400W, 200W; Resolution:10mW; Accuracy:±(0.1% + 0.5%FS)
Communication Interface
RS-232C
Protocol
SCPI
Data acquisition software:Have
Package Includes
1 x Host
1 x 3C power cord
2 x 250V/0.5A Spare fuse
Details Picture:
Weight | 4 kg |
---|
Only logged in customers who have purchased this product may leave a review.
Customers Also Viewed
-
Wool Felt Polishing Wheel Kit with 2Oz 60g Cerium Oxide Polishing Powder
$19Abrasive ToolsAdd to cartDescriptionWool Felt Polishing Wheel Kit with 2Oz 60g Cerium Oxide Polishing PowderSpecificationColor:Orange+White+SilverCerium Oxide Powder Capacity:2 Oz(60 g)Felt Polishing Wheel Diameter:2 cm/3 cmFeatures1.Cerium Oxide is the best polishing powder to glass scrach because the chemical and physical reaction.2.Easy to use,just mix powder with water and apply to the glass surface with the polishing felt to restore …
Wool Felt Polishing Wheel Kit with 2Oz 60g Cerium Oxide Polishing PowderRead More
-
23Pcs TIG Welding Torch Gas Lens #10 Glass Pyrex Cup Collet for WP-9/20/25 Series
$52Welding Torch PartsAdd to cartSpecificationsFit For:WP-9/20/25 SeriesColor:as picturesType:welding accessoriesApplicable Scope:TIGTungsten Needle Clip:1,1.6-1/16,2.4,3.2Electrode clip for the copper material, a very small amount of impurities, especially phosphorus, arsenic, aluminum, etc., will greatly reduce the copper conductivity.Three kinds of length of the tail, suitable for different types of electrode clip, easy to use.Package Included3 x TIG Back Caps4 x Glass Cup4 x …
23Pcs TIG Welding Torch Gas Lens #10 Glass Pyrex Cup Collet for WP-9/20/25 SeriesRead More
-
Drillpro 20pcs HRC45 Blue Nano DCMT070204 YBC251 Carbide insert for SDJCR/SDNCN/SDQCR Turning Tool
$56Carbide InsertAdd to cartSpecificationBrand:DrillproModel:DCMT070204 YBC251Hardness:HRC45Coating:Blue NanoMaterial:CarbideSuitable Holder:for SDJCR/SDNCN/SDQCR Lathe ToolFeatures(Fit for SDJCR/SDNCN/SDQCR Turning Tool Holder)1. Blue nano coating, high temperature resistance, better processing.2. Hardeness up to HRC45, fit for Normal processing stainless steel and ordinary, such as steel 45 steel,A3 steel, stainless steel and other soft materials 201,304.Also perfect for hardness material.3. Earn 3-5 times of service life.4. …
Reviews
There are no reviews yet.