Black 6-18M Outdoor Mist Coolant System Misting Cooling Kit for Greenhouse Garden Patio Watering Irrigation System

Descriptions
6-18M Outdoor Mist Coolant System Black Misting Cooling Kit for Greenhouse Garden Patio Watering Irrigation System
Specifications
Material:Brass body with stainless steel orifice
Working Pressure:2-30 Bar
Thread Size:10-24UNC
Color:Black
Size
Standard water tap adapter:Thread Size:3/4inch;
Mist hose:1/4inch(can work under normal pressure(2-3kg))
Type(Length):Included
6M Misting System:- 3M water supply hose
– 3M spray tube with 6pcs spray seats and 6pcs misting nozzles
– 1pcs faucet connector
– 1pcs stopper
– 20pcs cable ties
– 20pcs clamps
9M Misting System:- 3M water supply hose
– 6M spray tube with 11pcs spray seats and 11pcs misting nozzles
– 1pcs faucet connector
– 1pcs stopper
– 30pcs cable ties
– 30pcs clamps
12M Misting System:- 3M water supply hose
– 9M spray tube with 16pcs spray seats and 16pcs misting nozzles
– 1pcs faucet connector
– 1pcs stopper
– 40pcs cable ties
– 40pcs clamps
15M Misting System:- 3M water supply hose
– 12M spray tube with 21pcs spray seats and 21pcs misting nozzles
– 1pcs faucet connector
– 1pcs stopper
– 50pcs cable ties
– 50pcs clamps
18M Misting System:- 3M water supply hose
– 15M spray tube with 26pcs spray seats and 26pcs misting nozzles
– 1pcs faucet connector
– 1pcs stopper
– 60pcs cable ties
– 60pcs clamps
Instruction
1. Connect the Facuet adapter to the water tap;
2. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities;
3. Screw the misting nozzles to the Tee fittings, except the last one on the end plug;
4. Turn on the water tap to wash the system for 2 minute to insure that system is fully purged;
5. Turn the watet off and install the last nozzle into the fitting with the end plug;
6. Fix the misting line by the saddle clamps provided;
7. Turn on the tap slightly until jets are working, enjoy the cooling misting system;
8. Periodically remove the misting nozzles, and follow steps 2-5 to clean out the misting system.
Features
– Widely used in factory humidification, cooling, disinfection, dust fall, landscaping, salt fog test, and other artificial fog;
– The nozzle use American precision punching device, The aperture is about 0.3mm, well-made, compare the using costs and gas humidification, able to save more than 10 times;
– The nozzle can be completely atomized by the pressure of the tap water, and the effect of using the high-pressure water pump is better;
– This series of nozzles does not require air assistance, the system is simple, spray a fine mist, sufficient atomization, has the advantages of energy saving, water saving, low cost and good effect; Stainless steel spray sheet is processed by advanced forging technology, strong durability, the working life is about 2.5 times compared with similar products.
Package Included
1 Set x Misting System