1500N DC 12V 30W 50-250mm Linear Actuator Motor Aluminum Alloy 5mm/s Miniature Linear Actuato for Retractable Bed
$84
Length 50mm/Length 100mm (2.00)/Length 150mm (5.00)/Length 250mm (14.00)/Length 200mm (11.00)/
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Descriptions
1500N DC 12V 30W 50-250mm Linear Actuator Motor Aluminum Alloy 5mm/s Miniature Linear Actuato For Retractable Bed
This miniature linear actuator is using for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications.
It can be replaced by hydraulic, pneumatic products ideal for saving energy consumption.
Specifications
Product Name:Linear Actuator Motor
Material:Aluminum alloy
Load Capacity:1500N
Input Voltage:DC 12V
Speed:5mm/s
Watt:30W
Stroke Length:50mm/100mm/150mm/200mm/250mm
Working Frequency:20%
Features:Drive other objects to push, pull, rise, drop.
Applications:TV lift tables, massage beds, electric beds, medical chairs,
electric equipment,micro-devices, electric sofas, camera frames, cameras and more.
Quantity:1 Pc x Linear Actuator Motor
Technical Parameters
Push bar Each side contains a travel limit switch. When the telescopic bar runs to the top or to the top, it will automatically disconnect the electricity.
The motor will not idle. Cut off the power, it can be stop at any position, with self-locking function.
The push rod is driven by a DC motor with a screw drive. The telescopic rod can only be retracted without rotation.
The motor is positive and negative. For example, if the positive electrode is stretched and the negative electrode is shrunk, the telescopic direction of the rod can be changed by changing it.
Ambient temperature -25°C to +65°C.
Standard protection class:IP54.
Low noise design, noise level less than 50dB.
Notice
– Before use, first recognize whether the motor voltage is correct. If it is a DC motor, then also consider that the power supply current is sufficient.
– Do not store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce motor efficiency.
– When soldering is required on the positive and negative power supply’s motor
terminals, the soldering iron temperature is 340°C±40°C. Within 3 seconds of heating time.
– Do not deform the plastic.
– When installing the motor, pay attention to whether the screws are too long and the company must not over-press the long screws to the parts inside the motor.
Note
– Please do not disassemble the machine.
– Bracket and controllers need to be purchased separately, please search our products in our shop, and purchase the suitable kit.
Package Included
1 Pc x:Linear Actuator Motor
Weight | 0.9 kg |
---|
Only logged in customers who have purchased this product may leave a review.
Customers Also Viewed
-
Wool Felt Polishing Wheel Kit with 2Oz 60g Cerium Oxide Polishing Powder
$19Abrasive ToolsAdd to cartDescriptionWool Felt Polishing Wheel Kit with 2Oz 60g Cerium Oxide Polishing PowderSpecificationColor:Orange+White+SilverCerium Oxide Powder Capacity:2 Oz(60 g)Felt Polishing Wheel Diameter:2 cm/3 cmFeatures1.Cerium Oxide is the best polishing powder to glass scrach because the chemical and physical reaction.2.Easy to use,just mix powder with water and apply to the glass surface with the polishing felt to restore …
Wool Felt Polishing Wheel Kit with 2Oz 60g Cerium Oxide Polishing PowderRead More
-
23Pcs TIG Welding Torch Gas Lens #10 Glass Pyrex Cup Collet for WP-9/20/25 Series
$52Welding Torch PartsAdd to cartSpecificationsFit For:WP-9/20/25 SeriesColor:as picturesType:welding accessoriesApplicable Scope:TIGTungsten Needle Clip:1,1.6-1/16,2.4,3.2Electrode clip for the copper material, a very small amount of impurities, especially phosphorus, arsenic, aluminum, etc., will greatly reduce the copper conductivity.Three kinds of length of the tail, suitable for different types of electrode clip, easy to use.Package Included3 x TIG Back Caps4 x Glass Cup4 x …
23Pcs TIG Welding Torch Gas Lens #10 Glass Pyrex Cup Collet for WP-9/20/25 SeriesRead More
-
Drillpro 20pcs HRC45 Blue Nano DCMT070204 YBC251 Carbide insert for SDJCR/SDNCN/SDQCR Turning Tool
$56Carbide InsertAdd to cartSpecificationBrand:DrillproModel:DCMT070204 YBC251Hardness:HRC45Coating:Blue NanoMaterial:CarbideSuitable Holder:for SDJCR/SDNCN/SDQCR Lathe ToolFeatures(Fit for SDJCR/SDNCN/SDQCR Turning Tool Holder)1. Blue nano coating, high temperature resistance, better processing.2. Hardeness up to HRC45, fit for Normal processing stainless steel and ordinary, such as steel 45 steel,A3 steel, stainless steel and other soft materials 201,304.Also perfect for hardness material.3. Earn 3-5 times of service life.4. …
Reviews
There are no reviews yet.