1MHz~10GHz Portable USB RF Power Meter -45-0 dBm Adjustable Attenuation Value 0.96 OLED Digital Display

Features
RF-Power-Meter-V3.0 Portable USB simple radio frequency power meter. 0.96 inch 160×80 pixel TFT full-color display, 5V power supply and data communication via USB. Simple and easy to use, small size, easy to carry, stable performance, high accuracy, preset offset, wide dynamic range, measurement speed fast. The software supporting this power meter allows users to configure the power meter on the PC and makes data recording and sharing easy.
Product application
Calibration of radio frequency instruments;
Testing and maintenance of radio frequency equipment;
Measurement of standing wave ratio of radio frequency circuit (adding feedback bridge);
Measurement of return loss of radio frequency circuit;
Interference detection between wireless communication equipment;
RSSI (received signal strength indicator) and transmission power level detection;
Performance evaluation of step attenuator;
Measurement of amplifier gain and network attenuation;
Measurement of forward power and reflected power in directional coupler;
Power measurement of GSM signal modulated by GMSK*;
Product technical indicators
1. Measuring power range -45～+15 dBm (0 to -40dbm has good linearity)
2. Measurement power resolution ±0.1 dBm
3. Measuring frequency range LF～10000 MHz (different models have different frequency ranges)
4. Input impedance 50Ω
5. Dynamic range>60dB
6. Working voltage 5VDC (power supply via USB)
7. Charging current:500mA
Body size 55*24*14 mm (length X width X height)
With USB protruding on the left and SMA protruding on the right:79*24*14 mm (length X width X height)
RF common sense science
dB is a pure counting unit
For power, dB = 10*lg(A/B).
For voltage or current, dB = 20*lg(A/B).
dBm defines miliwatt (milliwatt). 0 dBm=1mw;
dBw defines watt. 0 dBw = 10lg1 w = 10lg1000 mw = 30 dBm.
By default, dB always defines the power unit, which is calculated as 10lg. Of course, in some cases, signal strength (Amplitude) can be used to describe work and power. In this case, use 20lg as the meter. This applies to both the control field and the signal processing field. For example, sometimes you can see the expression of dBmV.
Interface operation
6.1 Interface display description
FreqX
The frequency point to be tested, the default is Freq0, and 8 groups of frequently used frequency points (Freq1-Freq8) can be stored, which can be set by pressing the key or supporting the upper computer.
Level
The power value in dBm corresponding to the current frequency point
Power
The current frequency point corresponds to the power value in uW or mW
OffetX
The power correction value, the default is Offet0, and 8 groups of correction values corresponding to the frequency points (Offet1- Offet8) can be stored, which can be set by pressing the button or supporting the upper computer
Package includes
1 x USB RF Power Meter
1 x 6GHz/2W/30dB attenuator
4 x GSM/WIFI/433/315M Antenna
Please to download the software
Details picture: