Professional 1000W Hot Air Heater Torch Plastic Welding Tool Welder Flooring Tool

Features
1. No need of air pump and voltage regulating transformer to cooperate, easy to use.
2. Units without air pump and other equipment or engaged in high-altitude and long-distance plastic welding operations can be purchased as spare parts.
3. This product is most suitable for welding with plastic electrode with a cross-sectional area of not more than 6 mm square.
4. It is suitable for the welding of plastic sheet and the repairing of utensils. It is also suitable for the dedusting, moisture-proof and motor drying of instruments and meters.
5. It is an indispensable ideal tool for making chemical plastics.
Specifications
Model:Welding Torch
Size:325x65mm/12.8’x2.6′
Power Supply Type:AC Power Supply
Color:Blue
Temperature range:40-550℃
Rated Power:1000W
Rated Voltage:220V
Usage and precautions
1. Fire or smoke may appear when used for the first time.This is a normal phenomenon and will disappear automatically after 5 minutes of power.After the welding torch is used, please set the temperature to the lowest level. After the barrel is cooled, the machine can be shut down to avoid the waste heat damaging the parts and affecting the service life.
2. When the plastic sheet is heated to 130-140 degrees, it becomes soft and can be formed with a little pressure.The welding temperature is generally about 240 degrees, and the temperature at 5-10mm away from the welding nozzle is 200-260 degrees.Attention should be paid to the distance between the nozzle and the solder joint.To obtain the ideal welding temperature.
3. After the electric heating wire is broken, screw the shell to connect the screw, take out the torch core, and replace it with the torch core of the same specification.
4, the welding torch should be put gently after use, so as not to break the torch core part of refractory porcelain, and make the electric wire short circuit.
Package included
1 x Welding Torch
1 x Sets of Tool