5 in 1 LCD Digital Tire Pressure Gauge Night Lighting Hammer Cutter Deflation Needle Function

Specifications
Model:MD-1.1
Pressure display range:0~150 PSI (or 0~10 Bar, or 0~10 Kgf/c㎡, or 0~1000Kpa)
Display mode:LCD digital display
Material:ABS(Acrylonitrile Butadiene Styrene) Egineering Plastic Shell
Power Mode:Built-in LR44 Button Cell Battery (2 years lifespan)
Color:Red, Blue, Silver, Black
Size:Approx 16×7.2×2.9cm/6.3inchx2.8inchx1.1inch
Weight:130 g
5 Main Function
1. Measuring tire pressure function (for cars/minivans/SUVs)
2. Blu-ray lighting function (night lighting)
3. Hammer function (can broken the window when emergency)
4. Knife function (can cut off the seat belt to escape when emergency)
5. deflation needle function (withstand the valve core can quickly release the tire pressure)
With the points above, this 5-in-1 Tyre Gauge will bring the following benefits
①apply to help maintaining rational tyre pressures;
②reduce tyre wear and extend tyre life.
②Increase the fuel efficiency Improve vehicles handling and your safety.
Helpful Hint
In order to get a good seal, please put the tyre`s air nozzle up or off to the side. It`s best when the nozzle is around the 6 or 6 o`clock position so that you can firmly straightly press the gauge down. This means you have to crane your head a bit to read the digital measurement, but the important thing is to press straightly and hard onto the tyre`s nozzle.
Instruction
①Press the inchON / UNIT / OFFinch button, wait for inch0.0 PSIinch or inch0.00inchBar or inch0.00inchKgf/c㎡ or inch0inchKpa display and keep sound.
②Place the nozzle of the gauge over the tyre valve, press firmly to ensure a good seal and prevent air escaping.
③Hold the gauge on the valve until the reading on the LCD display locks.
④Remove the gauge quickly from the valve and read the measurement result.
⑤To retake the measurement, just place the nozzle over the tyre valve again and repeat the steps above.
⑥The gauge will automatically shut off 20~60 second after use to save the electric power, and it can be manually turned off by pressing the inchONinch button down for more than 3 seconds.
⑦The gauge is low-power-consumption The built-in button cell battery power can last for 2 year. If the power run out, just open the back cover to replace it with a LR44 cell battery.
Packaged included
1 x 5 in 1 LCD Digital Display Tire Pressure Meter