KS-8586 2 in 1 Soldering Iron Solder Rework Station Hot Air G un Handle Kit AC 110V/220V

Features
1. The product adopt closed loop of transducer, Mcu intelligent drive, Digital LED display. High-power. The temperature turn up is very fast. Temperature stabilization and is impervious to air. Use the brushless fan, and long life and low noise. It is good for lead free work too.
2. The air flow can be adjustable, and blowing is big and gentle blowing plastic components wont be deformed. Such as buzzer and external interface of mobile phone.
3. It is inductance in the handle, it will be quickly to work when you take the handle, when the handle is return to the shelf, the machine will automatic stopage.
4.Automatic to blow cool air to safe the heating. Temperature rapidly rises, and it can reach to the setting temperature only within 3 or seconds. Small volume lightweigh, temp-control accurately.
5.Safely remove BAG-IC,keep pina intact. Much more safe and reliable. Blowing PCB will not make it blister.
Specification
Model:KS-8586
Power Consumption:750W
Type:LED Digital Display(1℃)
Material:1mm aluminum + baking finish
Voltage:110v, 220v
Frequency:50/60Hz
Air flow:120L/min (MAX.)
Blower Fan:Brushless fan
Air g un heating core:spiral nickel wire metal heating element
Soldering station heating core:1322 ceramic heating element
Air g un temperature adjustment range:100°C ~ 450°C
Soldering station temperature adjustment range:200°C ~ 480°C
Handle Length(With cable):120cm
Noise
Plug:US / EU Plug
USAGE
1. Suitable for unsoldering multiple components, such as SOIC,CHIP,QFP,PLCC and BGA, etc(especially for flat cables and cable connectors)
2. Applicable for hot contraction, heating, depainting, degluing, defrosting, Preheating and rubber soldering, and so forth.
OPERATION INSTRUCTION
1. To put the soldering equipment ready, and leave handle on the holder
2. To connect the power
3. To set the best nozzle(large caliber nozzle preferred)
4. To switch on the power, the screen displaysinch—inch, it represents standby mode. (xxxxxx)
5. To pressinchinchorinch▼inchbutton(revolving switch)as to set up the temperature(xxxxxx)
6. To turn the temperature switch as to set up the required temperature(xxxxxx)
7. To hold the handle, so the equipment begins to beat, To adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is stable
8. To put back the handle on the holder after the work;mean while, the unsoldering equipment switch for heating mode to cooling heating element mode automatically. While the temperature is lower than 100℃, the screen displays“— Inch, it stands for switching for heating to standby mode, and after temperature of heating element is less than 70℃, the equipment is on standby(if there is a airflow out, it means the temperature is higher than 70℃, and there is no airflow only after the temperature is lower than 70℃)
9. To switch off the power and unplug if there is no operation for a long period time
Package included
1 x Hot Air Rework Station
1 x Hot air g un and holder
1 x Welding stand handle and soldering stand
3 x Nozzles
1 x IC extractor
1 x English Manual