Hantek DSO1062B 2 in 1 Handheld Oscilloscope 2 Channels 60MHZ 1GSa/s sample rate 1M Memory Depth 6000 Counts Multimter DMM with Analog Bargraph

Features
60MHz Oscilloscope, 1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
1M Memory Depth.
High Refresh Rate (2500 frames).
Large 5.6 inch TFT Color LCD Display; High Resolution(640*480); Dual-Window Design –More clear, More Detailed
One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
Easy-to-use menu with built-in multi-language help system.
32 Automatic Measurements.
Waveform Math:Add, Subtract, Multiply, and Divide.
Store and recall over.
Automatic cursor tracking measurements.
XY Mode.
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
Waveform Recorder to capture/r eplay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
Pass/Fail function compares a stored waveform to an unknown input.
Average Mode for smoothing waveforms.
Square Wave Output (2V, 1kHz) for probe adjustment.
USB Host/Device 2.0 full-speed interface; support removeable disk; LAN Option, easy to control by PC or long-distance.
Dimensions (mm):240(L) x 165(W) x 50(H), be carried easily
Specification
Model:DSO1202B:DSO1102B:DSO1062B
Oscilloscope mode
Bandwidth:200MHz:100MHz:60MHz
Real-time Sample Rate:1GSa/s
Equivalent Sample Rate:25GSa/s
Record Length(Sample Points):Single-channel:Maximum 1M; Dual-channel:Maximum 512k
SEC/DIV Range:2nS/div-2000S/div (in a 2, 4, 8 sequences)
Delay Time Accuracy:500ps
Vertical
A/D Converter:8-bit resolution
VOLTS/DIV Range:2mV/div5V/div at input BNC
Position Range:±50V(5V/div), ±40V(2V/div500mV/div), 2V(200mV/div50mV/div)±400mV(20mV/div2mV/div)
Rise Time at BNC:≤1.7ns:≤3.5ns:≤5.8ns
DC Gain Accuracy:±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger
Trigger Sensitivity
(Edge Trigger Type):DC:CH1/CH2(Typical) 1div from DC to 10MHz; 1.5div from 10MHz to Full
EXT￡¨Typical￡ 200mV from DC to 40MHz
EXT/5￡¨Typical￡ 1V from DC to 40MHz
AC:Attenuates signals below 10Hz
HF Reject:Attenuates signals above 80kHz
LF Reject:Attenuates signals below 150kHz
Noise Reject:Reduces trigger sensitivity
Trigger Level Range:CH1, CH2:±8 divisions from center of screen
EXT:±1.2V EXT/5:±6V
Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns):CH1, CH2:±(0.3div*V/div) (within ±4 divisions from center of screen)
Holdoff Range:100ns-10s
Trigger Type
Edge:Trigger on the rising or falling edge
Pulse Width:Trigger (when >,
Pulse Width Range:20ns-10s
Video:Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range:1-525 (NTSC), 1-625 (PAL/SECAM)
Slope:Trigger (when >,
Set Time:20ns–10s
Overtime:from the rising or falling edge
Set Time:20-10s
Alternate:Internal trigger on edge, pulse width, video or slope
Measurement
Cursors:Manual:The difference between voltage cursors ÷V; the difference between time cursors ÷T; 1/÷T calculated by Hz.
Tracing:The voltage and time at a waveform point
Automatic:Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Meter Mode
Max.Resolution:6,000 Counts
DMM Testing Modes:Voltage, Current, Resistance, Capacitance,Diode & Continuity
Max. Input Voltage:AC:600V, DC:800V
Max. Input Current:AC:10A, DC:10A
Input Impedance:10 MΩ
Display
Type:Right angle 5.6 16-digit color LCD
Resolution:640 x 480 dots
Contrast:16 gears, with the progress bar to show adjustment
Interface:USB host and USB slave, Lan Optional
Power Supply
Voltage:DC Input:12-17VDC, 1500mA
Mechanical
Size:245 x 163 x 52 (mm)
Package Included
1 x Hantek DSO1062B Digital Handheld Oscilloscope
2 x Oscilloscope Probe
1 x Test Probe
1 x USB Cable
1 x CD and Manual
1 x Wall charger with EU,US, Standard Plug
1 x Package bag