EONE ET310A 2 in 1 20MHz 80Msps Digital Handheld Storage Oscilloscope ScopeMeter True RMS Multimeter Automatic Measurement

Features
Combination of 4000 count auto-range true RMS DMM and multimeter.
DMM functions includes true RMS AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, dBm, diode and continuity tests.
Full auto-setup for volt/division and time/division of DSO.
Screen hold function.
Save and recall up to 100 waveform and data.
High contrast FSTN LCD with white LED backlight.
Auto power off in 5 to 60 minutes or continuous on.
Inner Li-ion polymer battery with AC adapter.
Isolated USB/RS232 interface with PC.
Specifications
Digital Storage Oscilloscope
Simulation bandwidth:DC~20MHz(50mV/div ~ 10V/div):Maximum real-time sampling rate:80Msps
The vertical resolution:8 bits:Nonlinearity:±1 bit
Channel number:1:Coupling:DC/AC/GND
Input impedance:about 10MΩ:indexing:Vertical ±4.8, horizontal 12.8
Vertical sensitivity range:50mV/div ~ 200V/div:When range:0.20μs/div ~ 20s/div
Vertical amplitude precision:±(5%+ 0.1div):When the yankee accuracy:±(0.01% + 0.1div)
Automatic zero reference:In DC/dB measurement:Scanning mode:Auto/normal/single
Trigger level:± 12 div (At each step, 0.1div):Trigger slope:Rising along/down along
Trigger position adjustment:± 6 div (At each step, 0.1div):Automatic Settings:When the vertical amplitude and automatic Settings
The cursor measurement function:dV, dt, 1/dt (Frequency):Automatic measurement function:Vp-p, Vavg, RMS, dBm
Automatic measurement accuracy:±(5%+ 0.1div):Record length:12.8div
20MHz refers to simulate bandwidth to 3db voltage when the attenuation of bandwidth, when the input signals interference, change with ADP08 and special high frequency shield.
1-2-5 for vertical attenuation switch range.
Digital Multimeter
Function:Range:Resolution of:Uncertainty
DC voltage:400.0mV:0.1mV:±(0.8%rdg + 10dgt)
4.000V:1mV:±(0.8%rdg + 10dgt)
40.00V:10mV
400.0V:100mV
1000V:1V:±(1.5%rdg + 10dgt)
AC voltage
True RMS
:400.0mV:0.1mV:50Hz~400Hz
±(1.2%rdg + 10dgt)
400Hz~2kHz (10kHz These will not be examined)
±(2.0%rdg + 10dgt)
4.000V:1mV
40.00V:10mV
400.0V:100mV
750V:1V:±(1.5%rdg + 10dgt) (50Hz~400Hz)
DC current:40.00/400.0mA:10μA /100μA:±(1.2%rdg + 10dgt)
4.000/20.00A:1mA /10mA
AC current
True RMS:40.00/400.0mA:10μA /100μA:±(1.5%rdg + 10dgt)
50Hz~2kHz (5kHz These will not be examined
4.000/20.00A:1mA /10mA
Resistance:400.0Ω:0.1 Ω:±(1.0%rdg + 5dgt)
4.000kΩ:1 Ω
40.00kΩ:10 Ω
400.0kΩ:100 Ω
4.000MΩ:1kΩ
40.00MΩ:10kΩ:±(3.0%rdg + 5dgt)
Capacitance:51.20nF:1pF:±(2.0%rdg + 10dgt)
512.0nF:10pF
5.120μF:100pF
51.20μF:1nF
100.0μF:10nF:±(5%rdg + 3dgt)
Frequency:5.12Hz ~ 10MHz:0.1Hz ~ 10kHz:± (1.0% rdg + 5dgt), (signal amplitude is not less than 1Vp-p, AC V or 20mA RMS, AC A)
Duty:0.1~99.9% (AC 1Vp-p)
Diode test:Open circuit voltage of about 1.5 V, the maximum test current of about 1.5mA
Continuity test:Determine resistance:approximately 30Ω
Automatic range switching:Can be applied to each measurement function
Range overflow Tips:“O. L” (Over load)
Multimeter to measure the rate of:2.5 times / second
Dynamic Data Window:Continue after the main display dynamic refresh to keep the actual measurement data
dB (-80 ~ +80 dB) reference impedance:2, 3, 8, 16, 50, 75, 93, 110, 125, 135, 150, 300, 600, 900, 1000, 1200 Ω
Fuse Size:Φ5*20,0.5A/250V Φ10*38,20A/500V
General Information
Display:128 x 128 pixel graphic LCD:Viewing Area:71.7mm x 71.7mm
Back Light:White LED, 3 levels of brightness:Input Impedance:10MΩ
Power:Inner Polymer Li-Ion Battery or AC adapter:Auto Power Off:5~60minutes adjustable with disable feature
Indication of low power::Charging time:About 3hrs
Battery life:12~16hrs approx. (vary with different models):Memory:100 records (both DMM data and DSO waveform)*
Operational conditions:0°C to +50°C (+32°F to +122°F);
Dimensions:86mm x 186 mm x 32mm:Weight:325g
Package Included
1 x EONE ET310A 2 in 1 20M 80Msps Digital Handheld Storage
1 x Test Probe
1 x USB Cable
1 x Charging Plug(EU Plug)
1 x Oxford Bag