Digital Turntable Stylus force Scale Acupuncture High Precision Jewelry Scale Digital Scales

Specifications
Weighing value/division value
g:oz:ct:ozt:TL:gn
100g/0.01g:3.5275oz/0.0005oz:500.00ct/0.05ct:3.2145./0.0005ozt:2.6667/0.0001TL:1543.2/0.1gn
Auto power off:default 1 minute auto power off (settable)
Stand weight:74g (including delivery 10G weight)
Operating temperature:10-30 ° C
Stainless steel measuring plate 37X37MM
LCD display:5-digit LCD display
Automatic low power alarm
Backlight:White backlight
Peeling function
Power:2X inchAG13inch battery
Dimensions:49X101X23mm
Six unit selection:g/ oz/ ozt/ TL/ ct/gn
Instructions
Hold the product, push the bottom cover at the OPEN position of the back cover as shown in Figure 2, and remove the protective cover (also used as a weighing container as shown in Figure 1). When covering, please align the side of the protective cover with the ribs. One side of the dial to avoid misalignment.
Place the product on a stable countertop and place the battery correctly as indicated in the battery compartment.
1. Press the “ON/OFF Inch button in the off state, wait for 5 seconds to display 0.00;
2. Place the weight on the surface of the tray. The value is the weight of the object.
3. Use the inchMinch key to change the unit of measurement, g / oz / ozt / TL / ct / gn;
4. Press the “T Inch key to force zero.
5. Press the power button again to turn it off during the power on state.
Unit hiding function
Press and hold the unit conversion button (M) for 4 seconds to light all the units, the “OZ Inch unit will flash, press the tare button (T) to select to hide or display, and press the unit conversion button (M) to shift the other unit. (This function is to choose the customer’s practical unit to keep the trade-off.) Exit and press the inchMinch button for 4 seconds to return to the normal mode, the G unit can not be hidden!
Shutdown time setting
Press and hold the “T Inch button for 4 seconds to display AU 60 (for 60 seconds), press M button to adjust the shutdown time (one file every 30 seconds, turn 0 to not automatically shut down), press “T Inch to confirm And enter the weighing state.
Quick calibration function
When the power is on, it will display 0.00 long press “ON/OFF Inch. After 2 seconds, it will display 0-(zero point). After waiting for 1 second, the weight value to be calibrated will be displayed (if the display is flashing 100.00), then the 100G weight is loaded. On the weighing pan, after 3 seconds, it stops flashing and the calibration is completed. (You can add the value according to the unit conversion key, press the tare key to reduce the value, according to the 10G amplitude addition and subtraction, you can select the appropriate weight value calibration. This product is equipped with 10G random weight, please adjust to 10G calibration).
Note
1. Please use this product in a stable, vibration-free, wind-free environment.
2. Please do not place any objects larger than the rated weight on the tray, which may damage the sensor. Do not hit the weighing tray when placing the object, and handle it with care.
3. Do not use the mobile phone within 30cm around the scale when using this product, as this may affect the use of this product.
4. The correct reading is read when the display value is stable.
5. When the display shows the battery symbol, please replace the battery immediately. If it is not used for a long time, please remove the battery.
6. Please use this product in the environment of 10-30 °C. If the temperature difference is too large, measurement error may occur. If the temperature difference is too large, please correct the product with standard weight and use it. The calibration must ensure that the product is in the same environment for 30 minutes. the above.
7. The “FULL Inch symbol will appear when the weight of the pallet exceeds the rated weight.
Package Includes
1 x Scale
1 x 10G Weight