JKD50565 Stepper Motor Controller Driver Use Applicable Engraving Machine Marking Machine And Robot
$85
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
You Can Click Here To View The English Manual!
Description
1.JKD50565S is a new digital stepper motor driver by JKONGMOTOR.It adopts the latest 32-bi DSP digital processing technology. The drive control algorithm adopts advanced variable current technology and advanced frequency conversion technology.The driver has small heating, smallmotor vibration and stable operation.
2.Users can set any subdivision within 200 -51200 and any current value in the rated current to meet the application needs in most occasions. Thanks to the built-in micro-subdivision technology, the subdivision effect can be achieved even under the condition of low subdivision.The operation is smooth and the noise is ultra-small under low, medium and high speed.
3.The driver integrates the parameter auto-adjust function, which can automatically generate optimal operating parameters for different motors to maximize the performance of the motor.
Feature
1.NEW 32-bit DSP technology
2.Can drive two phase stepping motors of 4, 6, 8 lines
3.Ultra-low vibration noise
4.Optical isolation differential signal input
5.Built-in high subdivision
6.The pulse response frequency can reach to 500KH(Factory default 200KHZ)
7.Automatic parameter adjustment function when power on
8.The current setting is convenient and can choose between 0.1 to 7.2A
9.Variable current control reduces the heating of the motor.
10.Subdivision setting range is between 200 to 51200
11.The current automatically halve at rest
12.Has the protection function of overpressure, underpressure and overcurrent
Specification
Model:JKD50565S
Electrical indicators
Instruction:Minimum:Typical:Maximum:Unit
Output current:0.1:-:5.6:A
Input power voltage:24:36:72:VDC
Control signal input current:6:10:16:mA
Control signal interface level:4.5:5:28:Vdc
Minimum pulse width of input signal:1.5:-:-:us
Step pulse frequency:0:-:200:KHz
Insulation resistance:100:::MΩ
Use environment and parameters
Cooling method:Natural cooling or forced air cooling
Use environment:Occasion:Do not place it next to other heating equipment, avoid dust, oil mist, corrosive gas, high humidity and strong vibration, and prohibit flammable gas and conductive dust;
Temperature:-5℃~+50℃
Humidity:40~90%RH
Vibration:5.9m/s2MAX
Storage temperature:-20℃~80℃
Using altitude:below 1000 meters
Weight:about 280g
Application
Suitable for all kinds of small and medium sized automation equipment and instruments, such as:engraving machine, marking machine, cutting machine, laser lighting, plotter, cnc machineautomatic assembly equipment, etc. It use very well in the equipment that user expects small noiseand high peed.
Package Included
1 x Stepper Motor Controller Driver
| Weight | 0.28 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
MACHIFIT JKD2060AC Stepper Motor Controller Driver Use Applicable Engraving Machine Marking Machine And Robot
$145Stepper MotorAdd to cartYou Can Click Here To View The Product Manual!Description1.JKD2060AC is a new generation digital 2- phase stepper motor driver, based on a 32-bit DSP processor, combination of the anti-resonance, low noise, micro-step and low temperature rise technology significantly improve the performance of the stepper motor, has low noise, small vibration, low temperature rise and high-speed …
-
Chihai CHIHAI CH-SM1545-M3xP0.5 Permanent Magnet Stepper Linear Motor 2-phase 4-wire Miniature Motor
$15Stepper MotorAdd to cartDescriptionsCHIHAI CH-SM1545-M3xP0.5 Permanent Magnet Stepper Linear Motor 2-phase 4-wire Miniature Motor Metric M3 Right-hand ThreadSpecificationsBrand:Chihai MotorModel:CH-SM1545-M3xP0.5 Permanent Magnet Stepper Linear MotorMaterial:Stainless SteelOuter Diamand:15 x 14.5 x 88mmShaft Diameter:Out shaft M3 x P0.5 (drive screw) Material:SUS303 Right-handed CWDrive Mode:2-phase 4-wire driveVoltage range:DC3.0-12.0V(rated) 9.0V(drive)Weight:About 40gSuitable For:Micro slide table, micro 3D printer, micro engraving machine, micro entryand exit …
-
Machifit Shock Absorber Stepper Vibration Damper for 42mm Nema17 Stepper Motor CNC Parts
$7Stepper MotorAdd to cartDescriptionMachifit Shock Absorber Stepper Vibration Damper for 42mm Nema17 Stepper Motor CNC PartsSpecificationType:42 Nema17 Stepper motor shock absorberMaterial:Metal+rubberSize:54x54x7mmUsage:3D printerQuantity:1pcsFeatures– Effective to reduce shock.– Suitable for 3D printer.– Anti vibration dampers for mostly applied stepper motors are available.– These energy- absorbing rubber mounts with a metal mounting face.– Stepper motors are affected by resonance.– Resonance is …
Machifit Shock Absorber Stepper Vibration Damper for 42mm Nema17 Stepper Motor CNC PartsRead More
-
Nema 23 2.0N.m Closed Loop Stepper Motor Kits 2 Phase 57 Servo Motor with Hybird Servo Driver Set for CNC Engraving Machine
$256Stepper MotorAdd to cartDescriptionNema 23 2.0N.m Closed Loop Stepper Motor Kits 2 Phase 57 Servo Motor with Hybird Servo Driver SetSpecificationMotor detailsModel:LC57H276Phase:2Step Angle:1.8 degCurrent:3.0AInertia Of Rotor:480g.cm²Holding Torque:2.0Nm Shaft Diameter:8mmMotor Total Length:98mmMotor Length:76mmMotor Weight:1.2KgDriverModel:LCDA257SVoltage:VDC20-50VMax Current:6ASubdivision Range:400-51200pprSignal Voltage:+5V(+12Vor+24V series current limiting resistor) Pulse Width:2.5μSPulse Form:Pulse+Direction/Pulse+PulsePulse Response Frequency:Max 200KHZSize:115×69.3×26.5mmWeight:0.21KgFeaturesNo lost step, accurate positioning.100% rated torque drive motor.Variable current control technology, high …
Customers Also Viewed
-
Drillpro 2Pcs Magnetic Screw Drill Tip Holder Angle Magnetic Pivoting Bit Tip Holder Magnetic Screwdriver Drill Bit Drive Guide Extensions Adapter
$28Drill AttachmentAdd to cartSpecificationsMaterial:Chrome Vanadium SteelColor:RandomDrive:1/4 Inch Hex(6.35mm)Shank:1/4 Inch Hex(6.35mm)Magnetic or not:MagneticFeatures1. The quick-connect handle is suitable for all electric drills and socket wrenches. The head is magnetic and can be quickly connected to the 1/4‘hexagon handle bit and socket.2. Chrome vanadium steel forging, high hardness and high torque. Built-in strong magnetism, the interface has a locking device.3. …
-
4.5x-11x Magnifier Desk Lamp Desktop Magnifying Glasses Repair Clampwith LED Light
$35Soldering SuppliesAdd to cartFeaturesLED lighting function can switch between high light and soft light.High magnification primary lens, clear magnification effect, natural.Suitable for electronic welding, model making, circuit board maintenance, etc.Two adjustable angle auxiliary clamps are used to fix objects of different sizes for multi-angle observation.SpecificationMaterial:Iron + Plastic + Acrylic LensProduct Color:WhiteLight Watt:0.14WLight:2x LED LightsFeature:With Switchable Cold and Warm …
4.5x-11x Magnifier Desk Lamp Desktop Magnifying Glasses Repair Clampwith LED LightRead More
-
Metal Dual Axis Digital inclinometer Protractor Digital Angle Finder Bevel Box with Backlight And Single-sided Magnetic
$79Wood Angle RulerAdd to cartFeature1.Dual and single axis with user friendly LCD display angle.2.With backlight3.A variety of styles can be selected (metal single-side, metal three-sides, aluminum frame) to meet the needs of different occasions4.Automatic power off in three minutes when you don’t use it. It can save power and extending battery life.5.Biaxial measurement in horizontal and vertical directions6.Measuring plane …
-
69cm SDS Shank Concrete Mixing Rod Cement Mixer Tiling Auger Drill Bit for Electric Drill
$87Auger DrillAdd to cartDescription69cm SDS Shank Stirring artifact concrete ash rod spiral leaf electric hammer fast glue cement mixer tiling toolSpecificationsMaterials:Carbon steelSize:12.5x69cmSuitable:concrete mixing rodType:SDS ShankFeatures– Carbon steel, durable and long lasting.– The size is 12.5x69cm, which is easy to operate.– Applicable to garden loose soil, it needs to be used with electric drill.Package Included1 x Electric Drill Bit(This …
69cm SDS Shank Concrete Mixing Rod Cement Mixer Tiling Auger Drill Bit for Electric DrillRead More
Reviews
There are no reviews yet.