Machifit DDCSV3.1 3Axis MACH3 offline CNC Lathe Controller Board Engraving Milling Machine Control System

Description
– DDCSV3.1 is a product that has been optimized in many aspects of software and hardware based on the previous version of DDCSV2.1.
– The control period of each location is only 4 milliseconds, and the control precision is high.
– The highest single-axis output pulse is 500KHz, the pulse width is adjustable, support common stepping motor and servo motor, DDCSV3.1 numerical control system adopts ARM+FPGA design architecture, ARM completes human-machine interface and code analysis part, FPGA completes the underlying algorithm and Control the pulse generation section.
– The design is reasonable, the control is reliable, and the operation is convenient. DDCSV1 panel layout structure is reasonable, 17 keys can complete common offline operations, support the versatile FANUC compatible G instruction set
WHY this controller is so appealing
– Control machine by this controller without computer.
Specification
Model Number:DDCSV3.1
Axis:3 Axis, X Y Z
Size 191*128*5mm
Application:CNC Engraving machine and CNC Milling machine
Product performance parameters
1 16-channel optocoupler isolates the common digital input interface;
2 3-way optocoupler isolation common digital output interface;
3 1 channel 0-10V spindle speed control analog output interface (can be modified into PWM output);
4 Supports up to 4 channels of stepper motor control, single channel up to 500KHz control pulse output;
5 ARM9 main control chip;
6 FPGA core algorithm chip;
7 17 operation keys;
8 The main control equipment is 24V power input, the current capacity requirement is not less than 0.5A;
9 Support U disk to read G command, G command file size is not required;
10 Equipped with a MPG interface to support universal handguns on the market.
11 Support panel button single-axis manual jog and linkage operation;
12 Supports quick assignment of run position operations;
13 Support multi-coordinate system (automatic saving after power down);
14 Support to save the breakpoint function (automatically save by pressing the pause button during operation, automatically save after power off); Based on 2.1, the following upgrades were made.
15 5-inch TFT screen with a resolution of 480*272;
16 sheet metal casing;
17 dedicated pluggable terminal block;
18 stepper motor control signal changed to differential output;
19 Dual power supply, internal circuit optimization for strong isolation, greatly improving stability;
Package Included
1pc x CNC Controller