JKD7208S Stepper Motor Controller Driver Use Applicable Engraving Machine Marking Machine And Laser Phototypesetting

You Can Click Here To View The English Manual!
Description
1.JKD7208S is a new digital stepper motor driver by JKONGMOTOR.It adopts the latest 32-bi DSP digital processing technology. The drive control algorithm adopts advanced variable current technology and advanced frequency conversion technology.The driver has small heating, smallmotor vibration and stable operation.
2.Users can set any subdivision within 200 -51200 and any current value in the rated current to meet the application needs in most occasions. Thanks to the built-in micro-subdivision technology, the subdivision effect can be achieved even under the condition of low subdivision.The operation is smooth and the noise is ultra-small under low, medium and high speed.
3.The driver integrates the parameter auto-adjust function, which can automatically generate optimal operating parameters for different motors to maximize the performance of the motor.
Feature
1.NEW 32-bit DSP technology
2.Can drive two phase stepping motors of 4, 6, 8 lines
3.Ultra-low vibration noise
4.Optical isolation differential signal input
5.Built-in high subdivision
6.The pulse response frequency can reach to 500KH(Factory default 200KHZ)
7.Automatic parameter adjustment function when power on
8.The current setting is convenient and can choose between 0.1 to 7.2A
9.Variable current control reduces the heating of the motor.
10.Subdivision setting range is between 200 to 51200
11.The current automatically halve at rest
12.Has the protection function of overpressure, underpressure and overcurrent
Specification
Model:JKD7208S
Electrical indicators
Instruction:Minimum:Typical:Maximum:Unit
Output current:0.1:-:7.2:A
Input power voltage:24:48:75:VDC
Control signal input current:6:10:16:mA
Control signal interface level:4.5:5:28:Vdc
Minimum pulse width of input signal:1.5:-:-:us
Step pulse frequency:0:-:200:KHz
Insulation resistance:100:::MΩ
Use environment and parameters
Cooling method:Natural cooling or forced air cooling
Use environment:Occasion:Do not place it next to other heating equipment, avoid dust, oil mist, corrosive gas, high humidity and strong vibration, and prohibit flammable gas and conductive dust;
Temperature:-5℃~+50℃
Humidity:40~90%RH
Vibration:5.9m/s2MAX
Storage temperature:-20℃~80℃
Using altitude:below 1000 meters
Weight:about 280g
Application
Suitable for all kinds of small and medium sized automation equipment and instruments, such as:engraving machine, marking machine, cutting machine, laser lighting, plotter, cnc machineautomatic assembly equipment, etc. It use very well in the equipment that user expects small noiseand high peed.
Package Included
1 x Stepper Motor Controller Driver